Your Hot Water Needs & The Methods For Saving Energy Here In Australia.

It is fair to say that we have our fair share of modern conveniences currently available to us in Australia and we are very fortunate indeed. Our demands have increased however and now we expect a lot more from our appliances. On average, most Australian households will put on about 1 to 2 washes every single week for our clothes and we take showers on a regular basis throughout the day due to the hot climate that we live in. All of this extra energy is leaving a much larger carbon footprint then we would like and so many Australians are concerned about that.

What we are looking for are appliances that are much more efficient but can provide us with our heating needs. It’s likely that many of the appliances in your home that produce hot water are at least five years old or more and so it is unlikely that they are running as efficiently as they should be. If you think it’s time for a change then you need to talk to the people at Atomic Hot Water who can provide you with all of the modern appliances that you could possibly need and all the information that you require as well. This is just one way to save on energy bills and reduce your carbon footprint and the following are some others.

• Look out for leaks – Something that you might regard as insignificant like an intermittent leak from a water faucet amounts to a significant amount of water over the year and so if you are noticing water dripping from your shower or any of the taps around your home then this is a leak that needs attention today. You would be surprised at how much this will increase your water bill so get on it as soon as possible.
• Purchase with energy efficiency in mind – It can be very tempting buying the cheapest model that is out there when it comes to things like washing machines, water heaters and others but you need to resist the temptation. You may end up saving yourself money todaybut over the long term and the lifetime of the appliance, you will be burning a lot more electricity and therefore the money that you thought you saved at the very beginning when you made your purchase will all have been lost to the costs of running it.
• Always choose low flow – You want the best performance from your appliances and you want to be using less water as well and so all modern appliances actually have a label on them telling you that they meet environmental standards and any specifications set out by the Australian government. This will guarantee you that they will be much more energy efficient and they will use a lot less water but get the job done right nonetheless.
• Fit light sensors – You wouldn’t believe the amount of electricity that is wasted in every Australian home and office throughout the year because people forget to turn off the lights. If you were to stand outside any business building, you would be greeted with a number of lights all switched on in many offices throughout that same building and there is nobody in them. When it comes to your home, you need to be more proactive and so by fitting light sensors in each room, once someone walks out then the lights go off. Similarly, if someone walks into the room then the light comes on.
• Stop leaving appliances in standby mode – You might think that your appliances are using very little electricity in standby mode and I suppose this is correct but if they are left on for 24 hours a day and 365 days of the year then this can amount to a significant amount of electricity usedthroughout your home or business.

These are just some simple ideas to help you to get the most out of your energy needs and to allow you to make more environmentally aware decisions as well. It’s better to have your money in your wallet or purse than having to pay about to your energy providers every single year.